Our revolving door K31 is available with an optional central display cabinet (possible from a diameter of 3100mm), night lock or integrated emergency exit facility.

The drive can either be concealed within the ceiling or under the finished floor as an in-ground operator. There is a choice of anodised colours or alternatively an all-glass design for a particularly transparent look.

The speed reduction device to allow for disabled access is optional. Bespoke solutions are available on request. 

Specifications

Revolving door K31 (3 leaves) System BLASI Manual operation, aluminium panels
Option 1: automatic positioning operator
Option 2: semi-automatic operator
Option 3: fully automatic operator
Option 4: VITRO (all-glass system)
Option 5: concealed underfloor operator
Option 6: for use in emergency exit route

Dimensions
Outer diameter 1800 mm to 6000 mm (min. 3000 mm for fully automatic version)
Fascia height 250 mm
Passage height 2100 mm to 4000 mm
Bespoke solutions available on request.

Turnstile
Three glass leaves offset by 120 º in relation to one another consisting of 10 mm safety glass framed in 65 mm
BLASI aluminium profiles, with integrated brush seals. Centre of turnstile with profiles, special lock with profile half cylinder (can be locked from the inside) three stainless steel door handles (diameter 30 mm).
Option 1: collapsible door leaves
Option 2: collapsible and sliding door leaves
Option 3: electromechanical locking mechanism
Option 4: central display cabinet

Drum walls
Curved aluminium panels with continuous BLASI aluminium profiles, bottom rail in stainless steel.
Option: curved 10 mm safety glass

Canopy
Aluminium construction with integrated insulation. Aluminium panels visible from below and above. Canopy is removable for inspection purposes (no visible screws).
Option 1: weather-proof canopy with integrated waterspouts
Option 2: weather-proof canopy with concealed drainage
Option 3: integrated air curtain with vent pointing to the entrance lobby
Option 4: integrated recessed low-voltage lighting (200VA)
Option 5: VITRO (all-glass system)

Floor frame
Stainless steel floor frame (installation depth 65 mm)
Option 1: to flange damp course membrane supplied by others on the outside
Option 2: integrated water collection tray including drainage spout

Downloadable drawings

  Blasi K31 Drawing A
  Blasi K31 Drawing B